Post by somratislam2 on Feb 15, 2024 6:24:29 GMT -5
The first evaluation criteria in a project are the resistant and adherent capacity of the existing material; Therefore, the cleaning item is a necessary step along with the removal and replacement of loose elements of the façade. Once these have been resolved, it is necessary to evaluate the adhesion capacity of the adhesive to be used. One of the most extreme cases is ceramic or glass facades such as tile, which due to their low porosity can mean that some types of adhesives do not have gripping capacity.
One way to solve either renders that disaggregate or surfaces with low adhesion, may be the use of hardening primers or primers to increase adhesion capacity, respectively. If all this fails, the SATE is still not ruled out, since there are variants of it that allow its exclusively mechanical placement through the use of plugs and screws, and whose extra cost can be justified because it Finland Email List can be less than what it would cost to chop, patch and remove existing material. With the SATE insulation system, the technical professional in charge of developing the project has an easily adaptable material, the insulation, which in any of its variants (EPS, mineral wool, etc.) is available in different thicknesses and can also be cut into works as needed.
This allows solving problems of collapses of already stabilized elements. Likewise, it solves the problem presented by the jamb and the lintel where the same thickness of insulation as the rest of the façade cannot be placed, but instead has to resort to thicknesses of cm or less, even reaching zero. The element that determines the choice of thickness is the carpentry of the old window, therefore, the evaluation of a change of windows with an insulating capacity proportional to the improvement that is being implemented on the façade would be desirable and taking advantage of the change of windows, choose ones that offer a correct solution for the thickness of insulation around them to minimize thermal bridges.
One way to solve either renders that disaggregate or surfaces with low adhesion, may be the use of hardening primers or primers to increase adhesion capacity, respectively. If all this fails, the SATE is still not ruled out, since there are variants of it that allow its exclusively mechanical placement through the use of plugs and screws, and whose extra cost can be justified because it Finland Email List can be less than what it would cost to chop, patch and remove existing material. With the SATE insulation system, the technical professional in charge of developing the project has an easily adaptable material, the insulation, which in any of its variants (EPS, mineral wool, etc.) is available in different thicknesses and can also be cut into works as needed.
This allows solving problems of collapses of already stabilized elements. Likewise, it solves the problem presented by the jamb and the lintel where the same thickness of insulation as the rest of the façade cannot be placed, but instead has to resort to thicknesses of cm or less, even reaching zero. The element that determines the choice of thickness is the carpentry of the old window, therefore, the evaluation of a change of windows with an insulating capacity proportional to the improvement that is being implemented on the façade would be desirable and taking advantage of the change of windows, choose ones that offer a correct solution for the thickness of insulation around them to minimize thermal bridges.